UL500 6 In 1 Multi Detector Laser Level Line Ultrasonic Distance Measures

Model Number: UL500/W Brand Name: Eoutil Key Specifications/Special Features: UL500 6 In 1 Multi Detector Laser Level Line Ultrasonic Distance MeasuresTechnical SpecificationsRecommended useMeasurement rangeAccuracyResolutionsAperture angleLaser Diode TypeLaser Class
Power supply
Calculation range
Length
Area
Vo l u m e
Operation environment
Operation temperature
Important note

Warnings
DO NOT stare direct at the laser beam
: Indoor
: 2′to 50′(0.6~15 meter)
: 0.5% Digit
: 1′′(0.01M)
: Approx.5 degrees
: Red laser diode 650nm
: Class IIIa (US version)/Class II(Europe version)
: 9V battery (6F22)
:
-9999 11 (9999M)
-999999 sq ft (99999M )
-999999 cu ft (99999M )
:
:()
Still air and hard target surface for accurate measurement.
The tool always measures from the base of the tool.
:
For long distance measuring between 40 FT to 50 FT(12M to
15M),the relative humidity should be above 48% and target
size of at least 10 ft by 10 sq ft /3M BY 3M .
:,
,.
Please read all instructions prior to operating the tools.
Use of controls or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
The power of the emission of the laser beam is less than 1 mW
in class II (Europe) and less than 5mW in Class IIIa(U.S.) and
Class IIIR(Europe),so the following warning must be followed
to avoid injury:

The tools require one 9 volt battery to operate
1. Open battery door on back of case.
2. Connect a 9-volt battery to battery clip.
3. Insert battery into case and replace battery door.
When battery is low, the low battery icon will be continuously
displayed on the LCD
.
1. Point to wall and get measured distance by press “Read”
2. For dynamic read, press and hold “Read” key to get
measured distance displayed while the unit is moving.
3. Each measurement erases the previous one.
4. Measured distance is displayed on top of the LCD sceen.